Metal

What Are The Advantages To Using Metal Roofing?

If you’re looking for a metal roofing contractor in Fayetteville NC or simply want to find out more about the different types of metal roofs and their advantages, then keep reading.

As the green movement continues to win converts, more and more Americans are considering energy efficiency when building or buying a home. In addition to lighting, plumbing, and HVAC systems, your choice of metal roofing can have an enormous effect on how energy is used in your home.

metal roof plates

Below we’ll discuss the many, often hidden, advantages of a metal roof for residential properties.

Energy Efficiency

Homeowners are paying a lot more attention to energy usage, for both environmental and economic reasons. So, when they learn that a metallic roof can reflect more of the sun’s rays and prevent heat transfer into the home, they are understandably intrigued.

How much can you save?

According to the experts, a well-made metallic roof coated with reflective paint can reduce cooling bills by up to 25 percent during the summer months. There are currently tax credits available to assist with the cost of adding these energy-efficient roofs to your primary residence.

Value

Because they are more expensive to install, last longer, and lower your energy bills, metal roofing typically adds value to a home. On average, homeowners can expect to add nearly $1.50 per square foot to a building’s total value. So, if you own a 2,000 square-foot home, its value would increase by $3,500 if you added metallic roofing.

Since homes with metallic tops are less likely to be damaged by fire, severe weather, and many other unexpected accidents and events, insurance companies can give discounts of up to 35 percent on homeowners insurance. Depending on the property and where it is located, a discount that large could save you hundreds, or even thousands, of dollars each year on your insurance coverage.

Durability

As popular as they may be, asphalt roofs don’t have a particularly long lifespan. Even if they are well maintained, the average asphalt roof will only last between 10 and 20 years.

By comparison, metal roofs have a much longer lifespan, between 40 and 70 years, not to mention the fact that they generally require less maintenance and repair than roofs which are covered in asphalt shingles.

The National Federation of Roofing Contractors advises to be careful with any trapped condensation to ensure it’s longevity, otherwise it can lead to unwanted corrosion.

Different Types Of Roofs

Many homeowners mistakenly assume that only one type of metal is used for these specialty roofs. However, the fact is that there are at least four different types you can choose from, each of them with their own strengths and weakness.

Tin, for example, has an impressive lifespan of between 40 and 50 years, while galvanized steel is an economical option that is not considered quite as attractive.

metal roof

Because it is not as strong as the other metals, aluminum doesn’t tend to last as long, but it does reflect heat better than the rest.

Last but not least, copper is widely considered to be the most aesthetically pleasing option, but is also the most expensive.

Five Types Of Metal Roofing

So it may come as no surprise to learn that metal roofing is preferred by many people due to its long lifespan.

The different types of roofing are:

Tin

The materials used here are created by heating up steel to a very high temperature and dipping it in molten Tin. The benefit of using such a material is that it’s extremely weather resistant when properly installed.

Although this material has this advantage, installing the roof is labor intensive and expensive. It also requires special skills so it’s highly advised that you hire the services of a professional roofing contractor to install the roof for you.

Copper

The main advantage of copper roofing is that its eye catching; therefore, it makes your home look elegant. When it’s coated with lead the roofing retains its elegant metallic shimmer for a long time.

The main flaw with it is that it’s expensive; therefore, it’s not widely used. It also requires special skills to install it; therefore, you have to hire the services of a professional to install the roofing for you.

Galvalume

This material is made by coating steel with a zinc and aluminum mixture. The advantage to using Galvalume is that it easily fixes some of the scratch damage on its own. Here it floats a portion of the coating over the areas which have been scratched. This roofing is popular in homes that are near salt water.

Aluminum

Aluminum is mostly used in wet climates. This is because it’s rust-proof. In addition to being rust-proof it’s also long lasting; therefore, you don’t have to replace it over and over again which saves you a lot of money.

Galvanized steel

This is usually coated with zinc in order to provide protection against oxidation and corrosion effects. Steel is installed in a number of forms such as shingles, standing seam units, and single metal roof.

This roof can last a very long time and doesn’t degrade when lightly scratched.

If you decide to build the roof yourself, then must make sure that you buy the right materials, particularly if you’re looking to invest in a good roof that will last a long period of time.

You should also ensure that you hire a professional roofer who will install the roofing the right way using the right design and without damaging your materials.

The best way of finding a professional roofer is searching online. Alternatively you can always ask your friends and see if they have anyone they can recommend.

How To Maintain Your Metal Roof

It is important to take care of your metal roof to make certain it has a lengthy life. The metal roofing manufacturers suggest spending a weekend a year to power wash any dirt and organic matter from the seams and channels.

Placing aside any other unforeseen damage, an excellent wash is all the maintenance your roof needs to keep it going for many more years.

Occasionally, a roof if damaged will need one or more panels to be replaced. This method calls for the opening of two or more sidelap seams to guarantee that the damaged panels will be removed and replaced.

In this situation, panels secured by three-piece seams are advantageous considering that the panels on either side of the damaged panel will hardly be disturbed if at all.

Cut the seam cap for the three-piece seam along its complete length with an air chisel or other equipment. Then lift out the damaged panel and lay the new panel it its location. Apply a brand new seam cap to complete the procedure.

Panels which are secured by two-piece seams normally are a lot more difficult to get rid of and replace without involving other adjacent panels. Some manufacturers will supply distinctive tools which will be utilized to pry open the seams.

When the damaged panel is removed, lay the new panel in its place and reseal the seams on either side of the new panel.

If this is done correctly, you shouldn’t be able to tell that a new panel has been installed except for maybe the color or cleanliness of the new panel.

Recoating a corroded or badly weathered metal roofing system may be an economical option to totally replacing the roof. In general, the recoating process requires that any peeling paint and loose, heavy corrosion be removed by either wire brushing or blasting.

The whole surface of the roof should then be cleaned thoroughly. Use a cleaning solution suitable for the original finish and allow some time for the roof to dry.

With the low maintenance and lengthy life, a lot of people are switching to a metal roof system for their home.

You will find a lot of great roofing companies who you can reach out to assist with the installation of your new roof. Make sure the roofing company is licensed, insured and has experience working with metal roofing systems prior to you hiring them.

Let Us Help

We have an incredibly hard working and skilled team that can help with any type of roofing in and around the Fayetteville NC area, including installing and repairing metal roofs, so why not contact us today to find out more about how we can help you today.